Analysis of Traction Properties of Massey Ferguson 7475 Tractor on Selected Deformable Surfaces

Main Article Content

Krzysztof Pieczarka
Mateusz Kierdal
Krzysztof Lejman
Zygmunt Owsiak

Abstract

The research concern selected traction properties of Massey Ferguson 7475 wheeled tractor, which were carried out on various deformable surfaces i.e. soil: after ploughing, sodded and with rye fore crop. The impact of driving speed on tractive power and force with 2WD and 4WD drive was investigated. Physical and chemical properties of soil during testing were characterised by moisture, compactness and maximum shearing stresses. Studies on traction properties were carried out with the use of two tractors: Massey Ferguson 7475 and New Holland 5040. During measurements, tractors were connected with a tow rod, where a strain force transducer was mounted. The stand enabled also measurement of theoretical speed. As a result of analyses of the obtained results, characteristics of tractive force and towing power as a function of slip were made. The tests confirmed that the use of four-wheel drive is unjustified because it improves these tractive parameters of a tractor. It was reported that the maximum force and towing power are generated for the lowest values of slip which is equal to 0.1 on the sodded surface. However, value of this power is the lowest in comparison to other surfaces. The highest value of the adhesion coefficient was reported on soil with rye fore crop.

Article Details

How to Cite
Pieczarka, K., Kierdal, M., Lejman, K., & Owsiak, Z. (2016). Analysis of Traction Properties of Massey Ferguson 7475 Tractor on Selected Deformable Surfaces. Agricultural Engineering , 20(1), 137–145. https://doi.org/10.1515/agriceng-2016-0014
Section
Articles